PREWIRED Jazz Bass FLEA Stacked KNObS Control Plate

J-Bass "Flea"stacked Knobs Control Plate

This wiring, unlike the original 1960, does not have the two resistors, so it has more output and clarity. We named the kit after Flea from the Chili Peppers because the same wiring is in his famous stacked knob Jazz Bass. The control plate is perfect for converting a standard bass to an early 60s.



  •     3-Hole Control Plate and Allparts stacked Knobs chrom/black
  •     2x .05 uf ZYW1S5 ARTY's 50's Vintage Style Capacitor
  •     CTS 250K/500K Concentric Pots Bottom- 500K, 3/16 inch, 4.77 mm,Top- 250K, .265 inch, 6.75 mm
  •     SWITCHCRAFT 1/4" Mono Audio Jack
  •     Cloth-covered Waxed Pushback 22 AWG Vintage Wire
  •     Reinforced Ground Connection between the Potentiometers, also for easier installation
  •     Stabilized insulated socket contacts
  •     Easy to understand Wiring Plan


The shipping costs for most EU countries are € 12,-. You can find more information about shipping costs under the link directly below the product costs (inkl. Mwst., zzgl. Versandkosten). If your destination country is not listed here, please contact us to calculate the shipping costs.


If you need help with the checkout form or payment, please don't hestitate to contact us via e-mail. We just need your address and the designation of the desired items. As soon as we have received the above information, we will send you the detailed invoice.


128,00 €

  • zurzeit nicht verfügbar

Why a Prewired HArness from Arty's Custom Guitars?



All our prewired kits have matched pots and caps. This means that we measure all potentiometers and capacitors before installation, select them, and use them according to their values where they deliver the best possible result in combination with the pickups. This is important because original pots have tolerances of up to +-20%. In extreme cases, a 500k pot can have values of only 400k or up to 600k ohms. Not infrequently good pickups are replaced unnecessarily, because they sound muddy, weak or thin. In reality, however, the problem is often not due to bad pickups, but simply to inferior wiring, which mercilessly destroys the actually perfect sound.

We compared enormous quantities of capacitors in interaction with various pickups and thus determined the most suitable tone caps under real conditions. The capacitors are hand-selected HQ film capacitors with very low tolerance, very similar in design to the originals from the fifties. The vintage paper wax skin gives the caps an additional look. Our capacitors are so close to the originals of the 50's that nobody will hear a difference.

In all our kits only the best components from well-known manufacturers like CTS, Switchcraft, CRL or Oak Grigsby are used. All kits are carefully manufactured in small quantities and professionally handcrafted, and delivered to satisfied customers all over the world.

Wünsche, Fragen, Anregungen, ...



Wishes, questions, suggestions,  ...