Prewired Harness GIBSON Guitars

This prewired harness leaves absolutely nothing to be desired. The circuit became famous by the guitar god Jimmy Page, who uses this circuit in many of his guitars. The four CTS push/pull pots allow the coil splitting, humbucker in series, ... (mehr lesen)

The wiring of this Wiring Harness corresponds to that of the fifties Les Paul models, but is also available with "Modern Wiring". In addition we have installed two push/pull tone pots for independent splitting of the two umbuckers. Splitti ... (mehr lesen)

With this Wiring Harness you get the legendary "Woman Tone" for your Les Paul. The Kit has the classic 50's Wiring, but is also available with Modern Wiring, and a 0.015 uf Bumblebee repro capacitor for the neck pickup, and a 0.022 uf cap ... (mehr lesen)

The wiring of this wiring harness is identical to that of the current Les Pauls. Replacing the original wiring is also worthwhile with this kit, read below. This kit is equally suitable for humbuckers as well as P 90 Pickups.   ... (mehr lesen)

This wiring was used in the first Les Pauls until the end of the fifties. Below you can find a summary of the differences between 50's and Modern Wiring. The kit is suitable for humbuckers as well as P-90 pickups.   Details: ... (mehr lesen)

The wiring of this prewired kit corresponds to that of the 50's Les Paul junior models. You can choose 50's or modern wiring. This kit is equally suitable for humbuckers as well as P 90 pickups.   Details:   CTS 500K 3/8" ... (mehr lesen)

Prewired Switchcraft 3-way toggle switch as a suitable upgrade to the Les Paul prewired kits. The switches are available in short, long and right angle versions. If you are not sure which switch is needed, please check or please ask before ... (mehr lesen)

Prewired Switchcraft 3-way toggle switch as a suitable upgrade to the Les Paul prewired kits. The switches are available in short, long and right angle versions. If you are not sure which switch is needed, please check or please ask before ... (mehr lesen)

On some types of guitars the top is too thick for the short thread of the Switchcraft Switch. In this case you need the Deep Thread Round Nut.   The shipping costs for most EU countries are € 12,-. You can find more information abo ... (mehr lesen)

This Prewired Kit leaves absolutely nothing to be desired. The circuit became famous by the guitar god Jimmy Page, who uses this circuit in many of his guitars. The four CTS push/pull pots allow the coil splitting, humbucker in ser ... (mehr lesen)

The wiring of this Prewired Kit corresponds to that of the standard SG models. In addition we have installed two push/pull tone pots for independent splitting of the two humbuckers. Splitting the humbuckers creates the typical brig ... (mehr lesen)

This Prewired Kit has the classic 50's Wiring suitable for the Gibson SG, and is also available with standard modern Wiring. For a clearer sound on the neck pickup (woman tone) we also have .015 uf Bumblebees in stock. This kit is equally suit ... (mehr lesen)

This Wiring Harness has the classic 50's Wiring suitable for the ES-330 and ES-335 and most similar models, but is also available with "Modern Wiring". For a clearer sound on the neck pickup (Woman Tone) we also have .015 uf Bumblebees in ... (mehr lesen)

This Wiring Harness has the classic 50's Wiring suitable for the ES-175 and ES-295 and most similar models, but is also available with Modern Wiring.  This Wiring Harness corresponds to that of the 50's Les Paul models, but is also availab ... (mehr lesen)

This Prewired Kit has the classic 50's Wiring suitable for the ES-339 and most similar models, but is also available with Modern Wiring. For a clearer sound on the neck pickup (woman tone) we also have .015 uf Bumblebees in stock. If you n ... (mehr lesen)

The wiring and construction of this Prewired Kit is the same as the Explorer models from 1958. The kit is available as 50's Vintage or Original '58 Explorer Wiring. There are also two different capacitors to choose from. The 0.02uf Sprague ... (mehr lesen)

The wiring and construction of this Prewired Kit corresponds to that of the Flying V models from 1967, with triangular arranged pots. The harness is available as 50's Vintage or Original '67 Wiring, and also with 0.015uF Bumblebee capacito ... (mehr lesen)

The wiring and construction of this Prewired Kit corresponds to the Flying V models of 1958, with the potentiometers arranged in a row. As with the original, all wiring is done with Vintage Braided Shield Wire. The kit is available as 50's ... (mehr lesen)

The wiring and construction of this Prewired Kit is the same as the Flying V models from 1958. The kit is available as 50's Vintage or Original '58 Flying V Wiring. There are also two different capacitors to choose from. The 0.02uf Sprague ... (mehr lesen)